• About Comer
  • Products

    RT Centrifugal Compressors

    RT Series Two-Stage RTM Series Oil Free Magnetic

    Refrigerant Screw Compressor

    RC2 Semi-Hermetic RC2-ExP ATEX Zone 1 Explosion-Proof Semi-Hermetic RC2-ExII ATEX Zone 2 Explosion-Proof Semi-Hermetic RE High Efficiency Semi-Hermetic RE-xVI Variable Vi Semi-Hermetic RG Open Type LBII Low Temperature Semi-Hermetic LT-S-(L/H/A) Two Stage Semi-Hermetic

    P Dry Vacuum Pump

    PS Series PD Series IPH Series

    Air Screw Compressor

    Single-stage Air-end Two-stage air-end Scroll Air-end
  • Support
    Selection Program
  • Contact Us
  • RT Centrifugal Compressors
    • RT Series Two-Stage
    • RTM Series Oil Free Magnetic
  • Refrigerant Screw Compressor
    • RC2 Semi-Hermetic
    • RC2-ExP ATEX Zone 1
      Explosion-Proof
      Semi-Hermetic
    • RC2-ExII ATEX Zone 2
      Explosion-Proof
      Semi-Hermetic
    • RE High Efficiency
      Semi-Hermetic
    • RE-xVI Variable Vi
      Semi-Hermetic
    • RG Open Type
    • LBII Low Temperature
      Semi-Hermetic
    • LT-S-(L/H/A) Two Stage
      Semi-Hermetic
  • P Dry Vacuum Pump
    • PS Series
    • PD Series
    • IPH Series
  • Air Screw Compressor
    • Single-stage Air-end
    • Two-stage air-end
    • Scroll Air-end

    RTM Series Oil Free Magnetic Centrifugal Compressor


    Environment friendly refrigerant-HFC-134a
    Environment friendly refrigerant-HFC-134a-0 ODP

    Advanced technology of magnetic bearing
    With the combination of mechanical, electrical, and control technology, the main shaft is held, rotated and controlled by electromagnetic field.

    Electronic control system
    Flexible control for the ease of system fine tune and performance
    Comprehensive monitor system. Monitor each control position for 15000 times per second.(radial / axial direction)

    VFD Control
    VFD controls meet the requirement of running at various working conditions and saving energy in different load.

    High Energy Efficiency
    With the DC inverter control technology and inlet guide vane mechanism, the load change can be responsed quickly. The IPLV is up to 11.0
    No gear transmission, no work loss

    Oil free, Zero pollution
    Comparing with conventional oil lubricated model, there is no risk in damage of moving part during power cut.
    Much Less maintenance cost.
    Free of oil quality and oil disposal problem.

    Low vibration and low noise
    High damping design for instant load changes.
    No friction from moving part, no vibration problem. Noise value is lower than 74 dBA.

    Anti-surge tactics
    Compressor control logic module ensure continuous operations within the safety area.

    Compact
    Comparing with screw compressor with same tonnage, the dimension is only 20% and the weight is only 45%.